Monthly Archives: November 2010

Calverton Shooting Range NY Part 2

I hope everyone’s Thanksgiving went well. Here is the continuation of my trip to the Calverton Shooting Range in Long Island New York. Below are pics of my friends Ruger Police Service Six in .38 Caliber and Kel Tec P3AT in .380 caliber. The Kel Tec P3AT is a tiny handgun that you can put anywhere. I fired two 6 round magazines into the target and after wards my hand had the checkering embedded into it. My friend who is 6ft 4in and about 265 lbs keeps it in his pocket. I joke with him that no one in their right mind is going to start messing with him and that his punch would do more damage than his little gun. Since I’m not a huge man I would prefer any gun to nothing at all. I enjoyed shooting the revolver more than I did the Kel Tec pocket .380.  The .38 revolver with the trigger pulled back is very accurate and has little kick. It takes a while to reload with out speed loaders but since it’s only for the range and not for self defense that’s fine. I have a bunch more pics of a variety of weapons that we used at the range so I’m going to continue with Part 3 later on this week.

Ruger Police Service Six

Ruger Police Service Six

Ruger Police Service Six

Ruger Police Service Six Target

Kel Tec P3AT

Kel Tec P3AT

Kel Tec P3AT

Kel Tec P3AT Target

Posted in Gun Review | Tagged , , , | 3 Comments

Calverton Shooting Range NY Part1

Happy Thanksgiving everyone. I have more pictures of guns and targets from a previous trip to the Calverton Shooting Range in NY that I have meant to post. The range I go to is in Long Island, NY. The address is  Calverton Shooting Range, Inc., 395 Nugent Drive (County Road 94), Calverton, NY 11933. It takes about 1 hour and 20 minutes to get to from the city. It’s a good place to go for a day of shooting during the week. It get’s crowded on the weekends so I recommend going early. The range sells ammo so you don’t have to worry about buying some before you go. There is a considerable markup so I wouldn’t buy ammo on-site unless you absolutely have to. When you get to the range one of the range employees will come over to your party and ask you for the range fee. Here are some pics of the range.

Calverton Shooting Range

Calverton Shooting Range - Rifle

Calverton Shooting Range - Pistol

When we arrived at the range we started with the pistols. I do not shoot handguns nearly as often as I would like so I made it a point to get myself up to speed and I went through most of our handgun ammo. My friends didn’t mind since they go more often than I do. Below I have pics of the Kahr K9 DAO pistol in 9mm and the Glock 19 in 9mm. The targets for each follows the guns.

Kahr K9 DAO

Kahr K9 DAO

Kahr K9 DAO

Target Kahr K9 DAO

Glock 19

Glock 19

Glock 19

Target Glock 19

My aim wasn’t all that great as you can see above. I tend to shoot a bit low initially. After I warm up I tend to hit center mass. The targets were 10 yards away and I was shooting rapid fire to see how I would fare against a human sized target at that range under pressure. The Kahr K9 DAO had  along trigger pull and the Glock 19 had a 12 and 1/2 lb trigger pull. Since both guns were owned my friends I didn’t complain too much. I prefer a short crisp trigger pull on my firearms and my performance changes when that differs. I’ve had a long Turkey day and I’m going to cut the post short. If anyone has questions please feel free to contact me. I’ll post part 2 on Friday.

Posted in Gear Review, Gun Review, Training | Tagged , , , , , | 4 Comments

D&L Sports AR-15 Vertical Grip

I hope everyone’s weekend went well. I spent some time in the country this past weekend with my new AR-15 Vertical Grip from D&L Sports. I’ve purchased vertical grips from other manufacturers and I was pretty disappointed. The main issue I had was that the other grips only had one retention screw and did not fit tightly on the Picatinny rail. I wanted a fore grip that was light, textured and had two cross bolts. The vertical grip from D&L fit the bill. I put one vertical grip on my Stag Arms Model 2 and another on on my PTR-91.

Stag Model 2

Stag Model 2

PTR 91

PTR 91

After testing out the placement of the grips on the Picatinny rails I put some blue Loc-Tite on the cross bolts and screwed them in place. I made sure not to use too much torque since I learned my lesson in the past stripping aluminum bolts on scope mounts. The grip was very sturdy and gave me excellent support. I had some issues with muzzle flip on the PTR-91 before I put on the grip. After installing the grip I had complete control of the rifle. There is one downside to the grip that I want to mention. The grip is a bit slippery due to the delrin material that it is made from. I tried putting o-rings in the grooves to reduce the slippage when it was in my hand but the o-rings made the grip uncomfortable. I figure with some use the grips will be fine. If it doesn’t improve I’ll take some fine sand paper to them to add some texture. Of all the grips that I’ve tried in the past this one is my favorite.

Posted in Gear Review | Tagged , , | 9 Comments

Kel Tec SU-16CA + EO Tech 555.A65 Update

I’ve cross posted the EO Tech 555.A65 Holographic Range Update on Ar15.com and received a bunch of comments regarding the poor groupings during rapid fire.  I don’t disagree with those comments but I do want to clarify some points.  I was shooting rapidly to see if I could hit a target at the 50 and 100 yard range on the bench and standing while reloading during the whole experience. The benches at the range were crappy at best. They wobbled back and forth like boats. The built in bipod on the Kel Tec SU-16 CA tapers down to a small point and there was a minimal amount of contact with the bench. When I was taking my time my results at the 100 yard target while standing the group was much better. It was my first time handling the rifle and I was getting accustomed to it. Here are pictures of the benches, the built in SU 16 – CA bipod and the result of well aimed shots at a 100 yards while standing. Don’t let my lack of expertise sway your opinion regarding the rifle. Next time I’ll make sure to put in a disclaimer stating that I go to the range 4 times a year at best and I’ve been out of the military for 14 years now :)

Range Benches

SU16 CA Bipod

Well Aimed Shots

Posted in Gear Review, Gun Review | Tagged , , , | 1 Comment

Colt XSE Series Combat Commander

Safety is first when handling any firearm, everything else is secondary. Always follow these basic rules:
1. ALWAYS treat all guns as if they are loaded.
2. ALWAYS never let the muzzle cover anything you are not willing to destroy.
3. ALWAYS keep your finger off the trigger until your sights are on the target.
4. ALWAYS be sure of your target and what is beyond it.

Colt XSE Series Combat Commander
Gun details
Model: O4012XSE
Action: Single Action
Barrel: Length 4 1/4″
Caliber: .45 ACP
Capacity: 8 + 1
Frame: Finish Brushed Stainless Steel
Frame: Material Stainless Steel
Front Sight: White Dot Carry
Grip Safety: Beavertail
Grips: Double Diamond Rosewood
Hammer: Enhanced
Name: Commander
Overall Length: 7 3/4″
Rear Sight: White Dot Carry
Thumb Safety: Extended Ambidextrous
Trigger Aluminum: 3 Hole
Price (2010): $800+


If you are looking for a reliable self-defense pistol in a great stopping power caliber, that is pleasant to shoot and handle then look no further. The Colt XSE Series Combat Commander has it all. There are many fine pistols produced by great manufacturers, but today I’ll talk about the legendary Colt Commander model.



The Pistol

I truly believe that pistol selection is a very personal matter. Try handling and shooting as many handguns as you can find and get the ones that fit your needs and shooting preferences best.

I picked the Colt Combat Commander model because it feels natural in my medium-sized hands, making handling and shot placement easy, even with one hand. It is a well built and nicely finished pistol… you get what you pay for. The new gun was pretty tight, but after about 200 rounds it loosened up and became just right. I didn’t find absence of a front strap checkering a problem, probably because of a “shark skin” finish on a handle. The trigger had a little travel, which I learned is quite common for a carry gun, and had a pull about 5-6 pounds. It requires little effort to make a shot, compared to let’s say new Glock’s trigger.

Disassembly of the pistol is straight forward, but assembly had a small challenge, and that was the insertion of the slide stop without scratching the frame. No, I didn’t manage it without a scratch, but what carry gun does not have them? There is a few step safety check in the manual, that is really worth to go through after each cleaning. Knowing the design helps one trust one’s weapon more.

I use a GALCO STO 266 holster for carrying my pistol and couldn’t say anything bad about it, even after long hikes in mountains. It feels right and comfortable, considering the weight of the gun. If the weight is a concern, there is a lightweight version of the Colt Commander…  Any decent belt would do but a wider and thicker one will fit perfectly into GALCO holster’s nylon clip.




The Shooting

This gun handles the power of the .45 caliber with excellence, making recoil very manageable and easy to control. A good and correct grip is essential. I found Todd Jerrett’s online grip and shooting tips very useful, just search for “todd jerrett grip” on google. The pistol delivers rounds to the point of aim at closer ranges (5-15 yards), making one big hole on a target, but it is quite capable at longer distances as well, if  a shooter does his part. By no means it is a target gun though.

I would recommend the Colt Combat Commander model to any shooting enthusiast who is looking for a 1911 model. It is a nice and reliable pistol with a proven record that is 100% made in the US. For those who would like to continue their research or learn more facts please visit the http://m1911.org/ website.

Posted in Gear Review, Gun Review | Tagged , , , | 3 Comments

Mossberg 500 Review

I love Mossberg shotguns. For my readers who will say that I love all the guns I review I have to agree with you. I love guns. It’s a rare gun that annoys me so much that I do not like shooting it. One recent example of a gun that I don’t care for is my friends Glock 19. He works for NY State and they are required to have a 12 1/2 lb trigger pull on their firearms. The trigger modification makes the gun suck balls. It’s fine for a magazine or two but if you try to take it out to the range for the day your finger will go numb. I have nothing against the Glock, only his trigger pull. Now back to the Mossberg 500. The Mossberg you see below is my friends gun that he received for free from a retiring police officer in NYC. He couldn’t complain about the price so he decided to bling it up a bit. He put a folding stock on it, a sling and a side saddle. The downside of the folding stock is that it makes accessing the safety switch somewhat difficult. Other than that it is a fine stock. Here are some pics.

Mossberg 500

Mossberg 500

Mossberg 500

I fired the Mossberg 500 with some ridiculously cheap Polish made Hunter brand ammo purchased about 15 – 20 years ago. The brass on the shells was tarnished and some of them were downright corroded. I thought it was a bad idea but my friend insisted we go through them so he can finally get rid of them. Even though we got one hell of a jam where I needed to take a pair of pliers to pull the spent round out of the chamber the shotgun performed flawlessly. The crappy ammo was loaded with #4 shot. We also had 50 rounds of 00 buck from Remington. We fired both types of ammunition at 50 Yards while standing in rapid fire. You can see the results below.

Double_00

Number_4

The number four shot was ideal at a distance of 50 yards. The double 00 shot was hit or miss. The spread was too wide for that distance. I would have felt more comfortable using slugs, which we were not allowed to use at the range, or 0 or 1 shot. The gun handled well, the action was smooth and the accuracy was great. I attributed the accuracy to the ghost ring sights on the shotgun. We fired a Remington 870 with a brass bead for comparison and the difference was pretty apparent. I personally own a Mossberg 590 which I cherish. There is something universal about that action being worked that put’s fear into people. That alone is worth the money to defend your home.

Posted in Gear Review, Gun Review | Tagged , , , | 8 Comments

Kel-Tec SUB 2000 Review

I bought a 9mm SUB-2000 by Kel Tec CNC. Out of the box the little gun seemed just right for the price that I paid. I fired about 50 rounds through the gun with two stoppages. I wasn’t concerned about this because I read reviews online that mentioned the rifle was finicky until it was broken in. I made sure that I used only brass ammo and not aluminum cased rounds. After I tried the gun out I decided to add some accessories to the rifle. I purchased a picatinny rail from Kel Tec and mounted a V2 LED Lenser Power Chip Flashlight on the front. I also ordered the padded case and the sling. The case is great but I didn’t like the way the sling interfered with the action so I went with a Specter Gear Viper Sling with webbing attachment buckle.  The rifle hangs a bit low to the ground using this sling but I found that it’s better than nothing but definitely not a perfect solution. I also added a Pachmayr Tactical Grip Glove cut to size, the Tacticool SUB-2000 Bolt Tube Cover and Tacticool SUB-2000 Operating Handle Cover. Here are some pics.

Kel Tec Sub 2000

Kel Tec Sub 2000

Kel Tec Sub 2000

Kel Tec Sub 2000

There are several down sides to this rifle. The front sight is pretty bad and it is tough to see in low light. If your shooting at targets that are of a light color the front sight get’s washed out. The trigger is reasonable with a bit of travel before it engages. The recoil is minimal and the safety is the opposite of every other rifle that is out there. Aside from the previous negatives the gun is very fun to shoot and it is one of my favorites. I plan on adding a reflex sight on the gun one of these days. Below are a couple of pictures from my time at the range. I fired about 200 rounds of Winchester 9mm  115 grain ammo at 10 and 25 yards(meters).

Ten Yards

10 Yards

Twenty Five Yards

25 Yards

Here are the technical specifications for the gun. I paid less than $300 for the 9mm version that takes Glock 15 magazines.

TECHNICAL SPECIFICATIONS
Caliber:   9mm Luger
Weight unloaded: 4.0 lbs
Length Open:    29.5″
Length Closed:   16″
Barrel length:   16.1″
Site:   Rear Aperture and Adjustable Front Circular Hood
Practical range: 150yds
Unique features: Rifle features an internal keyed deployment lock and the rifle can be reduced to a size of 16″ x 7″ to facilitate secure storage

Posted in Gear Review, Gun Review | Tagged , , , | 1 Comment

Smith & Wesson Model 5946

It’s been a good week. I’ve been to the range twice this week and that’s why I didn’t post earlier. Shooting accurately is a fleeting skill. You can be an expert one month and two months later you are just ok. I always mean to go to the range more frequently but life tends to get in the way. On Wednesday I had an opportunity to fire my favorite 9mm pistol. It’s the Smith and Wesson Model 5946. Unfortunately for me it has been discontinued by Smith and Wesson. It is a DAO (Double Action Only) pistol and has a very smooth trigger. It also fits in my hand perfectly. The pictures below are of the pistol.

Smith and Wesson 5946

Smith and Wesson Model 5946

Smith and Wesson Model 5946

Smith and Wesson Model 5946

Since I go to the range so infrequently I tend to shoot very poorly with pistols at first and once I get back into the swing of things I tend to impress even myself. When I first fired the pistol I could barely hit a standard paper target at 10 yards. It was damned pathetic. I asked my friend who’s a retired police officer to give me a quick tutorial. After the expedited 5 minute class I was shooting very well as you can see below.

Smith and Wesson Model 5946 Ten Yards One

Smith and Wesson Model 5946 Ten Yards Two

I was shooting Remington UMC 9mm Luger 124 grain bullets. I had one misfeed in 150 rounds fired. I attribute that to the gun not being cleaned properly by my friend :) . I can’t give him too much grief considering he let me shoot his firearms and I didn’t have to clean any of them afterwards. I love the Smith and Wesson Model 5946. I have no idea why they discontinued the handgun but I hope to pick up a used one in the future.

Posted in Gun Review | Tagged , | Leave a comment

Heroes and Stupid Criminals

I just ran across this video and article on CNN.com about a 16 year old robber in Miami. Luckily for all the people involved the gun did not go off and the citizens did not get injured other than a few minor scratches. The article on CNN.com is here.  If the people had weapons the criminal in this situation might have not seen his 17th birthday. I applaud the men for doing what is right. This is a reminder to stay vigilant and aware of your surroundings.

 

I’m off to the range tomorrow to do some more shooting. I’ll post a review of one of the firearms shortly. I know I have been slacking. Going on vacation throws off the natural order of things for me and it takes a while to get back to the swing of things.

Posted in General, Self Defense | Tagged , , | Leave a comment